In Sync with
Free Ceramic TechniquesClick images to
Technique #15 ~
Elements and Cascade
This beautiful little pot
is the result of adding 3 Mayco Lotus Blossom add-ons to a fat little pot/vase.
After firing to bisque the vase was glazed with these beautiful results.
You will need an appropriate cone 04 bisque
vase and the following products:
EL103 Sea Spray
In the greenware stage we added 3 Lotus Blossom
add-ons to a fat little vase. Didn't quite get them even, though! After firing
to bisque ~
1.Wipe dust off of bisque using a damp sponge.
2. Add a
small amount of water to Sea Spray and pour into vase. Roll to completely coat
inside of vase, turn upside down to drain excess glaze. When dry, use your
favorite glaze brush to apply 3 coats of Sea Spray glaze to the entire outside
of the vase, allowing the glaze to dry between coats.
3. Apply one heavy
coat of White Cascade over the top half of the vase, including the add-ons.
Allow to dry.
4. Apply one coat of Sea Spray over the entire vase.
Stilt and fire to shelf cone 06.
If you ever have questions about these techniques, feel free to
email us at: email@example.com
Simple, Secure, Convenient - Creative
Creative Glazes ~ 3407
Highway 120 ~ Duluth, GA 30096 ~ (770) 476-7322
Copyright 2000-2013, Creative Connections, Inc.
Creative Glazes is a trademark of Creative Connections, Inc.