| |
|
|
|
| A2 |
Deep
Cleanup Tool - Has both a deep cleaner for smoothing the inside bottom
of vessels as well as a cleanup blade for seams and details. Stainless
steel blades, tool is 8" long. |
|
|
| |
|
|
|
| A3N |
Lace Tool |
 |
|
| |
|
|
|
| CB |
Cleaning Block - Cleans
bisque and ceramic or porcelain greenware. 400 grit. Great for wet
cleaning. |
 |
|
| |
|
|
|
| CLS |
Clay Lift Set - Easily add
detail such as feathers, petals and scales by inserting the spoon
into damp clay and lifting. Instructions are included. |
 |
|
| |
|
|
|
| CUB |
Clean Up Brush - Used to
clean small delicate areas in greenware. |
 |
|
| |
|
|
|
| DCL |
Detail
Carving Tool - Large - The DCL tip is .075" wide to carve small and
miniature details. Steel blades are formed and precision ground to a fine
point. |
 |
|
| |
|
|
|
| DCS |
Detail
Carving Tool - Small - As above, exept the tip is .030" wide. |
 |
|
| |
|
|
|
| DPC
|
Deep
Cleaner - Designed for smoothing uneven areas and small bubbles on
the inside bottom of vases, mugs and cups. This 10.5" long tool has
stainless steel ends. |
 |
|
| |
|
|
|
| DTA |
Dipping
Tongs - Designed to save your fingers while dipping bisque into glaze.
The four sharp gripping points make minimal contact with bisque |
 |
|
| |
|
|
|
| F96 |
Soft
Fettling Knife - This tool is used to trim pour hole waste, remove mold
marks, carve and sculpt ceramics and greenware. It has a softer steel blade
than the F97 and has more flexibility to bend . Blade is 4" long, total
length is 8". |
 |
|
| |
|
|
|
| F97 |
Hard
Fettling Knife - This tool is used to trim pour hole waste, remove mold
marks, carve and sculpt ceramics and greenware. It has a hard tempered
steel blade with a conventional 'springy' feel. Blade is 4" long, total
length is 8". |
 |
|
| |
|
|
|
| FCR |
Flower
Clay Roller - This tool is for rolling out clay, just right for use in
conjunction with our Pattern Cutters. |
 |
|
| |
|
|
|
| GBC |
Glaze
& Bisque Cutter
Also known as a glaze saw. Ideal for enlarging
holes that have become filled with glaze. Remarkably tough steel rod is
coated with Tungsten Carbide particles. |
 |
|
| |
|
|
|
| K20 |
Recess
Smoother - Used for smoothing recessed flat spaces on clay, it is also
excellent for cutting clay and accentuating raised design. |
 |
|
| |
|
|
|
| K23 |
Cleanup
Tool - Those this tool has many uses it is primarily used to 'clean up'
slip-cast greenware by removing seam lines and mold marks, and
enhancing details. |
 |
|
| |
|
|
|
| K24 |
Spear-tip Cleanup Tool - Similar to uses above. |
 |
|
| |
|
|
|
| K27 |
Sgraffito Tool - The spearhead was designed to provide sharp
smooth cuts for incising, excising, widening and deepening detail work.
The forked end works well for hairlines, wood grain and basket weave
sgraffito effects. |
 |
|
| |
|
|
|
| K45 |
Klay Gun
- An Assortment of disks comes with this fun tool. Press soft clay,
bread dough or gum paste through the various shaped openings to create
hair, grass, rope, vines, etc. |
 |
|
| |
|
|
|
| KDSP |
Spatula
- This little spatula is perfect for stirring jars of paint. The square
edge gets right down into the bottom edge of the jar so you can mix up all
the glaze and not waste a drop. Sturdy plastic is completely washable,
too, so you can use it again and again - unlike those wood stirring sticks
which absorb paint making them virutally non-reusable. |

|
|
| |
|
|
|
| MDT |
Multi
Drill Tool - This hand tool is designed for the convenience of having
one tool that drills different hole sizes. Rotate this drill by hand using
light pressure up to the notch. Hole sizes are 1/16", 3/16", 5/16", 7/16",
1/2", 5/8", 3/4". |
 |
|
| |
|
|
|
| P41 |
Pallet
Knife - Used for mixing and applications of paint mediums. |
 |
|
| |
|
|
|
| PAS |
Patching
Spatula - This tool is used for patching greenware. The small flexible
blades make it easy to get into awkward areas for patching. Once you use
this tool you'll wonder how you ever did without it! |
 |
Sorry
- Out of stock |
| |
|
|
|
| PRO |
Pro Tool
- Use to cut heavy clay strips, designs and holes. Often used to poke
holes in clay buttons! So many great uses - you'll never put this tool
away. |
 |
|
| |
|
|
|
| SBR |
Saber
Saw - Use to make cut out designs in greenware, this tool is best
suited for straight lines. |
 |
|
| |
|
|
|
| SLD |
Scratch
& Lift Duster - also known as a Sgrafitto Tool. Use this tool to
scratch your design in greenware, lift bird feathers, flower petals and fish
scales. The gently brush away loose clay particles with the duster end of the
tool. |
 |
|
| |
|
|
|
| SMS |
Stilt
Mark Stone - Remove lines and marks left after firing with this stone. |
 |
|
| |
|
|
|
| SPD |
Salt
& Pepper Drill - This tool makes the right size hole in greenware salt
and pepper shakers. Larger end is for pepper. |
 |
|
| |
|
|
|
| SPG |
Sponge
Holder - Gets way down inside without gouging! Won't bend or flex under
stress. Replace the sponge with a sponge of your choice with the easily removed
and replaced hardware. |
 |
|
| |
|
|
|
| SWZ |
Paint
Mixer - Twirl handle between the palms of your hands to agitate and mix
paints, stains and glazes in the bottle. |
 |
|
| |
|
|
|
| WOT |
Wipe-Out
Tool Frequently used for tidying the edges of gold overglaze. Great for
highlighting and wipe-away of any oil-based product |
 |
|
| |
|
|
|