Home
Duncan
Mayco
Western
Kemper
Accessories
Directory
Duncan Brushes
Mayco
Brushes
Designer
Stamps
Golds & Lusters
Mardi Gras
Mayco
Tools
Miscellaneous
Orton
Tools
Contact
Us
Search
 |
|
Creative
Glazes

Orton
Cones
Small Orton
Cones
These small cones or bars are usually used in a kiln
sitter. When the cone or bar bends at the correct time and temperature the kiln
is turned off. These cones come 50 to a box.
Click here to view Orton
cone/temperature chart in degrees F. Temperatures shown below come from the
RIGHT column of the chart.
| 03 |
Cone
03 - Small pyrometric cones or bars - used in greenware to bisque firing,
takes temperature to approximately 2068F.
|
|
|
| 04
|
Cone
04 - Small pyrometric cones or bars - used in greenware to bisque firing,
takes temperature to approximately 2008F.
|
|
|
| 05 |
Cone 05
- Small pyrometric cones - used in glaze firing, takes temperature to
approximately1944F.
|
|
|
| 06 |
Cone 06
- Small pyrometric cones - used in glaze firing, takes temperature to
approximately1873F.
|
|
|
017
Basic
Decal Application |
Cone 017
- Small pyrometric cones - used in decal firing, takes temperature to
approximately 1443F.
|
|
|
| 018 |
Cone 018
- Small pyrometric cones - used in the firing of gold and other
precious metals, takes temperature to approximately 1386F.
|
|
|
| 019 |
Cone 019
- Small pyrometric cones - used in gold firing, takes temperature to
approximately 1333F.
|
|
|
| 020 |
Cone 020
- Small pyrometric cones - used in Mother-of-Pearl firing, takes
temperature to approximately 1231F.
|
|
|
| |
|
|
|
Orton Standing Witness
Cones
Witness cones are used to help you make sure your
kiln has fired properly. When firing to cone 04 (greenware) witness cones 03
and 05 should also be used. Most people put the three cones in a line so they
can visually judge if the firing is right. After firing the 03 cone should be
bent far over and perhaps even touching the kiln shelf, the 05 cone should
hardly have bent at all and the 04 cone should be curved perfectly downward,
but not slumped. Do not place witness cones too close to elements or vents as
this can affect their bending. Do not reuse witness cones. Note: These cones
come 25 to a box.
Click
here to view Orton cone/temperature chart in degrees F. Witness cones
are considered to be Self Supporting Cones and are shown in the Regular column
of the chart.
| 03 |
Cone
03 - Witness cones |
|
|
| 04 |
Cone 04
- Witness cones |
|
|
| 05 |
Cone 05
- Witness cones |
|
|
| 06 |
Cone 06
- Witness cones |
|
|
| 07 |
Cone 07
- Witness cones |
|
|
Witness Cones Set of three (from left) - cone 05 - 04
-03 Top row ~ Before firing Bottom row ~ After firing to cone 04
Simple, Secure, Convenient - Creative
Glazes.
Copyright 2000-2013, Creative Connections, Inc. Creative
Glazes is a trademark of Creative Connections, Inc. |